Tests of full scale AAC walls subjected to compression – analysis of the connection zone of perpendicular walls. Part 1

Vol. 556 (12) 2018 / poniedziałek, 31 grudnia, 2018

(InPolish)

Ł. Drobiec,

DOI: 10.15199/33.2018.12.09

Volume 556: Issue 12
Pages 29-31
Accepted for publication: 20.11.2018 r.

In [4, 5], the results of wall models on a full scale were presented, and the zone around the window opening was analyzed. In two parts of this paper will be described the second stage of research carried out on the same researchmodels, i.e. the analysis of the perimeter wall connection zone. The walls were made of 18 cmwideAAC blocks and thin layer joints. Reinforced and non-reinforced walls were tested. Basalt grids and typical steel reinforcement (truss type) were used as reinforcements. The load was applied by a reinforced concrete rimbeam.The first part of the article describes the test stand and the tests results. The second part will contain a detailed analysis of the test results and crack pattern of the models. Keywords: AAC masonry; compression tests;connection of perpendicular walls; tests on a full scale.
  1. Drobiec Łukasz. 2004. Analiza murów z cegły pełnej ze zbrojeniem w spoinach wspornych poddanych obciążeniom pionowym. Praca doktorska. Gliwice.
  2. Drobiec Łukasz. 2011. Problem of the crack formations in the area of intersecting loadbearing walls built with AAC masonry unit. Proceedings of the 5th International Conference on Autoclaved Aerated Concrete 9: 181 – 190. Bydgoszcz.
  3. Drobiec Łukasz. Limitation ofcracking inAAC masonry under the window zone/Begrenzung von Rissbildung in Porenbetonmauerwerk imBrüstungsbereich. Mauerwerk 21. 2017, H. 5, S. 332-342.
  4. Drobiec Łukasz. 2018. „Badania ścian zABK w skali naturalnej poddanych ściskaniu – analiza strefy wokół okna. Część 1”. Materiały Budowlane 553 (9): 75 – 77.DOI: 10.15199/33.2018.09.20.
  5. Drobiec Łukasz. 2018. „Badania ścian z ABK w skali naturalnej poddanych ściskaniu – analiza strefy wokół okna. Część 2”.Materiały Budowlane 554 (10): 118 – 120. DOI: 10.15199/33.2018.10.37
  6. Drobiec Łukasz,Radosław Jasiński,Tomasz Rybarczyk. 2016. The influence of the type ofmortar on the compres sive behaviour of walls made of AutoclavedAeratedConcrete (AAC).Brick andBlockMasonry – Trends, Innovations and Challenges. Taylor & Francis Group, London 2016, S. 1531-1538.
  7. Drobiec Łukasz, Jan Kubica. 2002. Influence of Some Types of Bed Joint Reinforcement on Mechanical Properties of Masonry Under Compression Proceedings of the British Masonry Society, no. 9: 99 – 104.
  8. Galman Iwona, Radosław Jasiński, Tomasz Hahn, Karol Konopka. 2017. „Badanie połączeń ścian murowych”. Materiały Budowlane (10): 94 – 96. DOI: 10.15199/33.2017.10.32.
  9. Galman Iwona, Radosław Jasiński. Joints in masonry walls. Ce Papers, vol. 2, s. 339 – 346. DOI. 10.1002/cepa.855.
  10. Jasiński Radosław,Łukasz Drobiec. 2016. „Study of Autoclaved Aerated Concrete MasonryWalls with Horizontal Reinforcement under Compression and Shear”. Procedia Engineering 161: 918 – 924.
  11. Piekarczyk Adam. Shear Stiffness of Solid Clay Brick Wallets Sheared Perpendicularly to the Masonry Bed Joints, Procedia Engineering, s. 1064 – 1069.
  12. Schubert Peter. 2004. Mauerwerk. Risse vermeiden und instandsetzen. Fraunhofer IRBVerlag.
dr hab. inż. Łukasz Drobiec, prof. PŚl, Politechnika Śląska; Wydział Budownictwa;

dr hab. inż. Łukasz Drobiec, prof. PŚl, Politechnika Śląska; Wydział Budownictwa;

 lukasz.drobiec@polsl.pl

Full paper is available at Publisher house SIGMA-NOT Sp. z o.o. webpage

DOI: 10.15199/33.2018.12.09